For Friendly Advice call:

01527 908044  Mon-Thur 9-5, Friday Off-Site

Bike to Bike & Rider to Pillion Communications

INTARIDE

COMMUNICATIONS

Back  Home  Purchase/Returns  Contact-Us  Tech/Help  Site-Map

What’s in the kit?

1x Bluetooth helmet module

1x USB charging lead

1x Clamp-on mounting plate

1x Boom microphone

2x High fidelity mylar speakers

1x 2-way radio adapter lead with PTT Button

NOTE: Mains USB adapter NOT INCLUDED.

5v 1.0 + amp USB supply  recommended.

£ 129.00

Radio AND Bluetooth!

BEST OF BOTH!


This unit acts as the bridge between the two methods of communicating (Bluetooth & Radio).


Bluetooth:

-KEEP WIRELESS between your radios and helmet!

-KEEP GPS / Phone connections

Interface:

-SEAMLESS Audio both ways!

-Radio to Bluetooth

-Bluetooth to Radio

Radio:

-LONG DISTANCE

-Reliable

-Robust

Dongle:

-Compact

-Easy installation

Do I need Anything Else?

The unit has an internal battery which should provide 8+ hours of use. But you can also power the unit from the bike using a USB (5v) adapter which are available from us. It does NOT support VOX.


Which Radios does it work with?

The unit comes with a Kenwood type connector, so it’s good for use with IntaRide 803, 630 , 600 & 650 radios, Kenwood 2-pin and many others which use a Kenwood connector.  If in doubt, by all means give us a call to discuss.


Do I need Anything Else?

Yes, the S-3 requires you to have an IntaRide S-3 Bluetooth helmet headset. It MAY work with other makes, but we will not sell this to customers without existing S-3 units unless you can either visit us or send your Bluetooth unit in for testing. We say this to prevent getting returns of equipment that we cannot re-sell if it doesn’t work with your particular system.


We make NO CLAIM that it will work with other brands of Bluetooth helmet headsets.


Systems purchased for use with other brands of Bluetooth helmet headset that are found to be incompatible will be subject to a re-stocking fee if returned.

12v USB Converter lead

On-bike converter lead with 5v USB output and weather protection cover.

In-line fuse pre-fitted

Vehicle 12v to 5v USB outlet lead

£   15.00

240v UK Mains USB adapter

240v UK mains USB adapter for IntaRide Evo Blue bluetooth motorcycle intercom

£     3.99

S-3 Bluetooth to Radio Bridge Lead

Two-Way Radio Adapter Lead with PTT Button

1x Kenwood Connector

1x Ptt Button

1x 4 Pole 2.5mm Jack

£    39.00

IntaRIde S3 Motorcycle Bluetooth Helmet Speaker Headset

1x Bluetooth helmet module

1x USB charging lead

1x Clamp-on mounting plate

1x Boom microphone

2x High fidelity mylar speakers

NOTE: Mains USB plug NOT INCLUDED

IntaRide S3 6 way motorcycle bluetooth helmet headset

£ 99.00

YOUR PERFECT SOLUTION

Starting from scratch?

If you haven’t already got an S-3 Bluetooth Unit you’ll need to use the purchase option to the left.

Otherwise,

 any spares you need can be found below- or on the Bluetooth Spares Page.

The History

At long last the successor the to BIRD has finally arrived…

It took a little longer than originally anticipated as we’re sure our customers are aware of-

however we wanted to ensure that we kept (and Improved upon) the best aspects of the original -

 whilst phasing out the restrictions that held It back.